基于LS -DYNA公路桥车桥耦合的车辆模型研究

研究公路桥梁在移动车辆荷载作用下的动力响应,建立合理的车辆模型非常重要。为更真实地体现桥梁在车载作用下的动力响应,基于LS-DYNA程序,结合常用重型车辆的结构特性及参数,对车辆的橡胶轮胎、轮胎内气体压力、车轮转动和车辆悬架系统进行模拟,使车辆模型更接近实际车辆。通过车辆轴重和动力特性初步验证车辆有限元模型的有效性;同时,以一座混凝土简支空心板梁桥为算例,验证车轮转动和车桥相互接触力,并将LS-DYNA计算结果与桥梁实测结果进行对比,进一步验证车辆有限元模型的有效性。研究结果表明,基于LS-DYNA建立的三维车辆有限元模型是可行的,可以用于研究车桥相互作用。     

ZrB2-SiC-Csf超高温陶瓷复合材料碳纤维损伤抑制研究

采用放电等离子烧结和热压烧结制备了短切碳纤维(Csf)增韧ZrB2-SiC超高温陶瓷复合材料(ZrB2-SiC-Csf),研究了制备工艺对ZrB2-SiC-Csf复合材料微结构演变、力学性能和抗热冲击性能的影响.结果表明:烧结温度是导致碳纤维结构损伤的主要因素,降低烧结温度能有效抑制碳纤维的结构损伤.采用纳米ZrB2粉体在1450 ℃低温热压烧结制备的ZrB2-SiC-Csf复合材料在断裂过程中表现出纤维拔出、纤维侨联和裂纹偏转增韧机制,其临界热冲击温差高达741 ℃,表现出良好的力学性能和优异的抗热冲击性能.从热力学的角度阐明了ZrB2-SiC-Csf复合材料中碳纤维结构损伤的机理,并揭示了该类材料的烧结温度应低于1500 ℃.     

多孔复合钙铝氧化物的制备、表征及在重整生成油中的脱氯应用

采用低廉的铝盐和钙盐,通过共沉淀法制备了一系列不同CaO含量的CaO-Al₂O₃复合氧化物,并用XRD、TG-DTG、N₂吸附-脱附、SEM等手段对其进行表征。结果表明,制备的复合氧化物两相分布均匀、孔隙率较高、存在较多的介孔和大孔,比表面积也较大。采用动态吸附法将制备出的复合氧化物应用于重整生成油中氯化氢的脱除反应中,结果表明,高比表面积和大孔容的CAO-1具有最佳的HCl脱除效果,当反应温度为55 ℃、液空速为3 h^-1,重整生成油中氯含量小于等于15 ng/μL时,其氯容可达到18%。     

Order acceptance and scheduling with machine availability constraints

We consider an order acceptance and scheduling model with machine availability constraints. The manufacturer (machine) is assumed to be available to process orders only within a number of discontinuous time intervals. To capture the real-life behavior of a typical manufacturer who has restrictions of time availability to process orders, our model allows the manufacturer to reject or outsource some of the orders. When an order is rejected or outsourced, an order-dependent cost of penalty will occur. The objective is to minimize the makespan of all accepted orders plus the total penalty of all rejected/outsourced orders. We study the approximability of the model and some of its important special cases.     

Preparation and adsorption property of novel inverse-opal hierarchical porous N-doped carbon microspheres

The design of pore structure is the key factor for the performance of porous carbon spheres.In this wo rk,novel micron-sized colloidal crystal microspheres consisting of fibrous silica(F-SiO_2) nanoparticles are firstly prepared by water-evapo ration-induced self-assembly of F-SiO_2 nanoparticles in the droplets of an inverse emulsion system to be used as sacrificial templates.Acrylonitrile(AN) was infiltrated in the voids of the F-SiO_2 colloidal crystal microspheres,and in-situ induced by ~(60)Co y-ray to polymerize into polyacrylonitrile(PAN).After the PAN-infiltrated F-SiO_2 colloidal crystal microspheres were carbonized and etched with HF solution,novel micron-sized inverse-opal N-doped carbon(IO-NC) microspheres consisting of hollow carbon nanoparticles with a hierarchical macro/meso-porous inner surface were obtained.The IO-NC microspheres have a specific surface area as high as 266.4 m~2/g and a molar ratio of C/N of 5.They have a good dispersibility in water,and show a high adsorption capacity towards rhodamine B(RhB) up to 137.28 mg/(g microsphe re).This work offers a way to obtain novel micron-sized hierarchical macro/meso-porous N-doped carbon microspheres,which opens a new idea to prepare high-performance hierarchical porous carbon materials.     

双功能改性的T型分子筛膜用于有机溶剂脱水

将3-氨丙基三乙氧基硅烷（APTES）引入到T型分子筛膜表面,用以修饰多晶膜合成过程中产生的缺陷。X射线衍射、场发射扫描电子显微镜、X射线光电子能谱和FT-IR等方法的表征结果显示,APTES通过“键合”的形式被成功地修饰到膜表面上。APTES层起到2个作用：一是提高膜的亲水性;二是减少膜层的缺陷。将修饰后的膜应用在348 K、90%的异丙醇水溶液的脱水时,该膜表现出比较高的分离因子和通量。该方法重复性良好,5个修饰后的膜样品的选择性平均增加了大约8倍（从359±23增加到2 934±183）,而渗透通量仅仅从（3.52±0.10） kg·m^-2·h^-1降低到（3.06±0.14） kg·m^-2·h^-1（减少13.07%）。在363 K下,修饰的膜经过100 h的连续测试,膜渗透测得的水含量均可达到99.50%以上,表明修饰后的膜性能较稳定。     

TiO_2/Ag_2NCN复合光催化剂的制备与可见光催化性能

利用银盐与单氰胺水溶液的沉淀反应,通过共混不同质量分数的纳米TiO2粒子制备了TiO2/Ag2NCN复合光催化剂.使用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、傅里叶变换红外(FTIR)光谱仪和紫外-可见(UV-Vis)吸收光谱仪对复合光催化剂的结构进行了表征.结果表明,锐钛矿相TiO2纳米颗粒沉积在Ag2NCN表面形成异质结构,二者间以弱的物理作用力相结合.TiO2的掺杂使得复合颗粒的UV-Vis吸收光谱发生红移,带隙变窄.以亚甲基蓝(MB)为光催化降解对象,研究了TiO2/Ag2NCN复合颗粒的可见光催化活性.结果表明,与单一Ag2NCN相比,复合颗粒表现出增强的光催化性能.对TiO2/Ag2NCN复合颗粒的光催化反应动力学过程及光催化机理进行了探讨.     

Combination of Solid‐Phase Micro‐Extraction and Direct Analysis in Real Time‐Fourier Transform Ion Cyclotron Resonance Mass Spectrometry for Sensitive and Rapid Analysis of 15 Phthalate Plasticizers in Beverages

A method for rapid identification and quantification of phthalate plasticizers in beverages was developed. A number of 15 phthalate plasticizers which covered all the phthalates concerned in the US Consumer Product Safety Improvement Act (CPSIA), European Union legislations and Chinese national standards (GB) were analyzed. By a combined solid‐phase micro‐extraction (SPME) and direct analysis in real time mass spectrometry (DART‐MS) approach, phthalates at sub‐ng·mL^?1 levels can be qualitatively and quantitatively analyzed in a short time. The use of ultrahigh‐resolving power and the accurate mass measurement capacity naturally provided by Fourier transform ion cyclotron resonance mass spectrometry (FT‐ICR‐MS) minimizes the matrix interferences and thus enables the evaluation of phthalates in a complex matrix without extensive sample handlings or preparations. The limits of quantification (LOQs) were estimated to be at 0.3–5.0 ng·mL^?1, lower than the Maximum Residue Limit (MRL) regulated by the European Union legislations (2007/19/EC) in foods, beverages, food packaging and toys (0.3–30 ng·mL^?1). This rapid and easy‐to‐use SPME‐DART‐FT‐ICR‐MS method provided a relatively high‐throughput and powerful analytical approach for quick testing and screening phthalates in beverages and water samples to ensure food safety.     

接触问题的非线性互补－接触柔度法

基于势能互补原理，不引入额外松弛变量，对库仑摩擦定律未做预先线性化近似，提出了三维弹性摩擦接触问题的非线性互补－接触柔度法，收敛性和收敛速率得到了严格理论保证。数值实验结果表明方法可靠、有效、低存储量、高精度